A 3000 is one of the best small tractors ever built by any brand or color of that era. They are absolutely bulletproof. Good parts availability – both new and used, not hard to work on. They are nimble – especially with power steering, have an excellent power to weight ratio and shucky- darn, are just fun to drive.
What horsepower is a 3000 Ford tractor?
Ford 3000 features a water-cooled motor and 3-cylinder OHV. The engine of this tractor is capable of producing 37 horsepower. You can get this tractor with built-in 158 cubic inches gas and 175 cubic inches diesel engine.
Are Ford tractors good?
In my experience they were good, reliable tractors as long as you didn’t use the dual power too much. In my opinion the dual power was about like the TA on the IH tractors. It was good when it worked but expensive to fix when it didn’t.
What years did they make Ford 3000 tractor?
The Ford 3000 agricultural tractor was produced yearly for the 10 years between 1965 and 1975. Ford discontinued the model in 1975, replacing it with the model 3600 agricultural tractor.
How heavy is a Ford 3000 tractor?
Ford 3000 – dimensions
|Ford 3000 Tires: Ag front: 5.50-16 6.00-16 Ag rear: 12.4-28 13.6-28 14.9-24 16.4-24|
|Weight (operating):||4,185 lbs [1898 kg]|
|Weight (ballasted):||6,940 lbs [3147 kg]|
|Wheelbase:||75.8 inches [192 cm]|
|Length:||127 inches [322 cm]|
Is a Ford 4000 a good tractor?
The 4000 is sn excellent tractor and the orice is very good if it mechanically sound.
What horsepower is a 5000 Ford tractor?
It has a 4 cylinder Ford diesel engine or gasoline engine that produce 69 horsepower and has two wheel drive and four wheel drive models that weigh up to 9700 pounds. View the Ford 5000 specs below. The Ford 5000 tractor has a category 1 and 2 three point hitch and a claimed pto of 53.09 hp.
Can a Ford 8N run a tiller?
TILLER: The ‘N’ tractor WILL NOT RUN A TILLER! Unless the tractor is equipped with a rare Howard or Everett auxiliary transmission. The ground speed is simply too fast without it. Another option if you REALLY must use a tiller with an ‘N’ would be a tiller with its own engine.
Which is better Ford 8N or 9n?
They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.
Does Ford still make tractors?
Ford, which began making farm tractors in 1916, no longer produces any in this country, depending on output from factories in Canada, Belgium and England.
What HP is a Ford 4000 tractor?
|Ford 4000 Power|
|Engine:||55 hp 41.0 kW|
|Drawbar (claimed):||41 hp 30.6 kW|
|PTO (claimed):||46 hp 34.3 kW|
Does Ford 3000 have live PTO?
It has a 3-cylinder OHV, water-cooled engine. It could be ordered with a Ford-built 158-cubic-inch gas or 175-cubic-inch diesel engine. It was rated at 130 horsepower at the PTO. … Some of the available options were differential lock, power steering, Live PTO and hydraulic remote valves.
What horsepower is a 3600 Ford tractor?
|Ford 3600 Power|
|Engine (gross):||48 hp 35.8 kW|
|Engine (net):||45 hp 33.6 kW|
|Drawbar (claimed):||34 hp 25.4 kW|
|PTO (claimed):||40 hp 29.8 kW|
What year did Ford tractors have live PTO?
Ford came out with independent live PTO in 1959 in the Select-O-Speed equipped tractors.
Is a Ford 2000 tractor gas or diesel?
The four-cylinder unit was a diesel with a 2.4-liter tank, whereas the four-cylinder gasoline machine had a 2.2-liter tank.
How many horsepower is a Ford 2000 tractor?
|Ford 2000 Power|
|Engine:||36 hp 26.8 kW|
|Drawbar (claimed):||28 hp 20.9 kW|
|PTO (claimed):||31 hp 23.1 kW|
|Drawbar (tested):||28.10 hp 21.0 kW|