|Category||Tractor Power||Top link pin diameter|
|1||20-45 HP||3⁄4 in (19 mm)|
|2||40-100 HP||1 in (25 mm)|
|3||80-225 HP||1 1⁄4 in (32 mm)|
|4||More than 180 HP||1 3⁄4 in (44 mm)|
What is the difference between Category 1 and Category 2 hitch?
The lower lift pins are 7/8″ in diameter, and the top link pin is 3/4″. The cat 1 hitch is used on tractors from 20-45 hp. A cat 2 hitch is 32″ wide. The top link is located 24″ above the center line between the two lower lift pins.
What is a Category 1 or 2 tractor?
Category 0 Hitch For tractors with up to 20 horsepower. Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower.
What is a Category 3 hitch?
Category 3 hitches are found on tractors of 80 hp to 225 hp and have top link pins that measure 1-1/4″ and lift arm pins of 1=7/16″. The spacing of the lift arms is about 38″. … Category 3 tractors are beyond what most homesteaders will have, but if you do be aware of the the difference between the cat.
What is the difference between category 0 and 1 hitch?
differences, as one goes up in Category implements the fabrication us usually more robust and can handle more tractor horsepower. In your case a Category 0 implement would probably be lighter weight than a Category 1 even though both are 48″. More weighty material & heftier fabrication = $200.
What is a Category 2 tractor?
Once you cross over 50 horsepower and you move up into utility tractors, you’re gonna move into Category 2. This is typically used on tractors between about 50 and 150 horsepower or so, although there are always gonna be some exceptions in those ranges.
Does a 3 point hitch float?
Registered User. A 3 point hitch is always in a “float” mode it does not have any down pressure. Depending on your tractor it may have position control, were the downward travel is controlled by the 3 point lever, the futher it is moved the lower the lift arms will drop.
What is a 3 point drawbar used for?
They come in real handy for skidding logs as you can lift the front of the log log up over obstacles. Also for trailer jockeying, having the hitch on the 3pt makes coupling trailers easy. with a ball on your scraper box you would be limited in it’s movement and you wouldn’t go over the road with it.
What is a 2 point hitch?
The planter 2-point hitch provides a reliable, simple, and secure method for tractor attachment. This hitch design utilizes the tractor’s Category 3 or 4N quick-hitch for fast, one-person hookup. … The offset crossbar allows an operator to move the planter over 7.5-in. by changing an attaching pin location.
How much weight can a 3 point hitch lift?
The lift capacity of the 3-point hitch is 1356 pounds (615 kg) measured at 24 in. behind the hitch balls.
What size is CAT 1 3 point hitch?
Three-point hitch specifications
|Category||Hitch pin size|
|1||19 mm (3⁄4″)||22.4 mm (7⁄8″)|
|2||25.5 mm (1″)||28.7 mm (1 1⁄8″)|
|3||31.75 mm (1 1⁄4″)||37.4 mm (1 7⁄16″)|
|4||45mm (1 3⁄4″)||51 mm (2″)|
What is draft control on a 3 point hitch?
The draft control on a tractor’s three-point hitch becomes very important when plowing. … Draft control senses the extra strain on the hitch and allows the plow to raise just enough to get through the hard spot, immediately returning to the desired depth.
How wide is a 3 point hitch?
|Category 2||Category 3|
|Lower link hole diameter||28.70 mm (1.13 in.)||37.34 mm (1.47 in.)|
|Lower hitch point Span (1)||825 mm (32.48 in.)||964.95 mm (37.99 in.)|
|Width of ball (2)||44.96 mm (1.77 in.)||44.96 mm (1.77 in.)|
|Pin centerline – Lower to upper (3)||610.11 mm (24.02 in.)||685.04 mm (26.97 in.)|
What size are cat 1 pins?
|Pin Diameter||1-1/7 in.|
|Pin Length||6-1/2 in.|
|Pins Type||Draw Pin|
What is a sleeve hitch for a garden tractor?
Once attached, the sleeve hitch lets you place ground engaging attachments to your garden tractor at the proper angle for convenient use. Boasting a simple one-time installation of mounting brackets to the tractor, the sleeve hitch offers super-simple removal for tractor use with other tow-behind attachments.