Does Ford 8N tractor have live PTO?

Supporting Member. One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.

What year did Ford tractors have live PTO?

Ford came out with independent live PTO in 1959 in the Select-O-Speed equipped tractors.

What is a live PTO on Ford tractors?

A live PTO works with the use of a two-stage clutch. Pressing the clutch half-way will disengage the transmission while pressing it fully will disengage the transmission and the PTO. This allows the operator to slow down or change gears while the PTO is still operating.

Does a Ford 9n have a live PTO?

A continued drawback to this series of tractor, was the lack of a “live” PTO. … It was the first Ford tractor to feature a clutch on the left side and independent brakes on the right. The wide-spaced front wheel design of the 9N and 2N was retained.

IT IS INTERESTING:  Does a tractor have to be insured?

Which is better 8n or 9n?

They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.

Does a Ford 600 tractor have live PTO?

Premium Member. What is the middle number? There really is no 600 tractor, it likely is a 640, a 4 speed without live pto.

Are 8N Ford Tractors good?

The Ford 8N is the standard of reliability, built to last for generations. While these tractors do require occasional maintenance, there are no significant design flaws that would make this tractor unreliable. These tractors are easy to work on.

What is the difference between live and non live PTO?

On a non live pto “transmission pto” the pto will stop when you disengage the clutch. You have to disengage the clutch to turn the pto on and off. On a live pto you can push the clutch in partially to disengage the transmission but the pto keeps running. When you push the clutch in all the way then the pto stops.

How does the PTO on a tractor work?

The tractor’s stub shaft, often called the PTO, transfers power from the tractor to the PTO-driven machine or implement. Power transfer is accomplished by connecting a drive shaft from the machinery to the tractor’s PTO stub shaft. The PTO and drive shaft rotate at 540 rpm (9 times/sec.) or 1,000 rpm (16.6 times/sec.)

IT IS INTERESTING:  How much do riding mowers weigh?

Does a Ford 2000 tractor have live PTO?

Looking at, it looks like all Ford 2000’s should have live pto via 2-stage clutch.

Does Ford 3000 have live PTO?

It has a 3-cylinder OHV, water-cooled engine. It could be ordered with a Ford-built 158-cubic-inch gas or 175-cubic-inch diesel engine. It was rated at 130 horsepower at the PTO. … Some of the available options were differential lock, power steering, Live PTO and hydraulic remote valves.

How fast can a Ford 8N go?

A 1952 Ford 8N tractor dubbed the “8NCREDIBLE,” has taken the title of world’s fastest farm tractor, reaching a speed of 96.3185 miles per hour.

Does a Ford 641 have live PTO?

The 641 model did not have live PTO from the factory, only the 661 Workmaster had live PTO from factory. This tractor might have options such as power steering, power-adjust rear wheels, a Sherman auxiliary transmission and possibly dual hydraulics.

What is an 8N Ford tractor worth?

You might find a good “clean” 8N with a fresh paint for $1800 or a fully redone one for 5k.

How many HP is a Ford 8N?

Ford 8N

Ford 8N Power:
Drawbar (claimed): 23.16 hp [17.3 kW]
PTO (claimed): 27.32 hp [20.4 kW]
Drawbar (tested): 21.95 hp [16.4 kW]
PTO (tested): 23.24 hp [17.3 kW]

What years did Ford make 8N tractors?

The Ford 8N tractor was introduced in 1947, and 442,035 were built between then and 1952. The majority of them are still running. The 8N was the last of a series of tractors—the N-series—built by Ford starting in 1939, the first two being the 9N, made through 1942, and its successor the 2N, built through 1947.

IT IS INTERESTING:  Do all tractors have the same key?