|Ford 2N Power:|
|Drawbar (claimed):||12 hp [8.9 kW]|
|PTO (claimed):||23 hp [17.2 kW]|
What is a 2N Ford tractor worth?
(Ford’s L-head four-cylinder engine produced just 23hp at the belt pulley.) The 9N and 2N used three-speed transmissions, while the 8N was equipped with a four-speed, but this doesn’t seem to hamper the value of the older tractors. Prices typically range from $1,000 to $3,000, depending on condition.
What is the difference between a Ford 9N and 2N?
Another main difference between the 9N and 2N was the fact the 9N featured a generator and battery, while the 2N used a magneto and a hand-crank starter.
What is the difference between a 8N and 9N Ford tractor?
They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.
Is a Ford 9N a good tractor?
The short answer is yes. The 9N is one awful tractor to work compared to an 8N, NAA or later. Not only do you don’t get position control and live hydraulics like on the 8N, both the clutch and left wheel brake are on the left, meaning with the clutch depressed you can only use the right brake.
How many HP is a Ford 8N?
|Ford 8N Power:|
|Drawbar (claimed):||23.16 hp [17.3 kW]|
|PTO (claimed):||27.32 hp [20.4 kW]|
|Drawbar (tested):||21.95 hp [16.4 kW]|
|PTO (tested):||23.24 hp [17.3 kW]|
How do I know what Ford tractor I have?
Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter. The first number is the model number.
What year did Ford stop making tractors?
Henry Ford and Harry Ferguson.In 1928, Fordson tractor production was halted in the United States, only to be resurrected in 1939 as the Ford Model 9N.
How fast can a Ford 8N go?
A 1952 Ford 8N tractor dubbed the “8NCREDIBLE,” has taken the title of world’s fastest farm tractor, reaching a speed of 96.3185 miles per hour.
Is a Ford 8N a good tractor?
The Ford 8N is the standard of reliability, built to last for generations. While these tractors do require occasional maintenance, there are no significant design flaws that would make this tractor unreliable. These tractors are easy to work on.
How many hours are too many for a tractor?
Modern compact tractors however, tend to be pretty finished by the time they get to 3000 hours or so. But that will take 30 years at 100 hours a year. But modern farm tractors from 1990s onwards – are still going today and many are now pushing 10 – 15,000 hours.
What kind of oil do you put in a Ford 8N tractor?
For its 8N, Ford specified mild EP gear conforming to Ford specs M4864A (SAE 80) for temperatures below freezing and M4864B (SAE 90) for temperatures above freezing. This conforms to modern-day API gear oil designation of GL3.
What is a 2N Ford tractor?
The Ford 2N was a variation on the 9N introduced due to World War II. By designating a new model, Ford was able bypass wartime restrictions on price. The 2N has some component changes due to wartime shortages. The battery and alternator were eliminated, and replaced with a magneto and hand-crank start.
Does Ford 8N tractor have live PTO?
Supporting Member. One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.
What is the difference between a Ford 8N and a Jubilee?
An 8n has a significantly better power/weight ratio than a Jubilee which may be important if you are going to trailer it. It also has a more durable hydraulic system and considerably better fuel economy as someone has already mentioned.