Ford 600 Weight: 2462 Pounds (lbs.)
How many horsepower is a Ford 600 tractor?
The “600” and “700” both had around 30 HP on the drawbar with the “600” set up as a utility or plowing tractor while the “700” was a row crop version with high ground clearance. The “800” and “900” both had around 40 HP with the “900” as the row crop tractor.
How much does a Ford 601 Workmaster weight?
Ford 601 Workmaster DIMENSIONS
|Operating weight:||3,291 lbs 1492 kg|
|Ballasted weight:||5,523 lbs 2505 kg|
|Front tread:||52 to 80 inches 132 to 203 cm|
|Rear tread:||52 to 76 inches 132 to 193 cm|
How much does a Ford tractor weigh?
|Ford N-series tractor|
|Wheelbase||70 in (1,778 mm)|
|Length||115 in (2,921 mm)|
|Width||64.75 in (1,645 mm)|
|Curb weight||2,410 lb (1,093 kg)|
Does a Ford 600 tractor have live PTO?
It doesn’t have a live pto. You will need an overrun clutch on equipment such as a rotary mower or the mower will push you forward.
How much horsepower does a Ford 800 tractor have?
Power, Mechanical and Electrical
Each model has three, 14-inch plows and a claimed belt power of 40 horsepower.
Is a Ford 641 Workmaster a good tractor?
These are great tractors, and the 641 is a good utility tractor. It is short and low to the ground, which makes it useful for mowing, pulling wagons, etc. Other than not having live PTO and being essentially a 30 HP tractor, the 641 is an excellent tractor.
Does Ford 601 have live PTO?
It does have live hydro but does not have live pto. It has four forward gears..
How many horsepower is a 4000 Ford tractor?
|Ford 4000 Power|
|Engine:||55 hp 41.0 kW|
|Drawbar (claimed):||41 hp 30.6 kW|
|PTO (claimed):||46 hp 34.3 kW|
When did they stop making Ford tractors?
Henry Ford and Harry Ferguson.In 1928, Fordson tractor production was halted in the United States, only to be resurrected in 1939 as the Ford Model 9N.
Can a Ford 8N pull a 2 bottom plow?
They will not pull a 2 bottom plow and if you are mowing very thick grass with a 5ft. brush hog you are going to have to drive very, very slow.
Which is better Ford 8N or 9n?
They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.
Does a Ford 2000 tractor have live PTO?
Looking at tractordata.com, it looks like all Ford 2000’s should have live pto via 2-stage clutch.
What is a live PTO on Ford tractors?
A live PTO works with the use of a two-stage clutch. Pressing the clutch half-way will disengage the transmission while pressing it fully will disengage the transmission and the PTO. This allows the operator to slow down or change gears while the PTO is still operating.
Does a Ford 801 have live PTO?
The tractor came with a standard four-speed transmission, with the option of a five-speed (my recommendation) or the Ford Select-O-Speed option. Also offered: live PTO, three-point hitch, larger rear tires, heavy-duty front end and power steering.