The 9N weighed 2340 pounds and had 13 drawbar horsepower, which could pull a two-bottom plow. It was designed to be safe, quiet and easy to operate.
Is a Ford 9N a good tractor?
The short answer is yes. The 9N is one awful tractor to work compared to an 8N, NAA or later. Not only do you don’t get position control and live hydraulics like on the 8N, both the clutch and left wheel brake are on the left, meaning with the clutch depressed you can only use the right brake.
How much horsepower does a Ford 8N tractor have?
|Ford 8N Power:|
|Drawbar (claimed):||23.16 hp [17.3 kW]|
|PTO (claimed):||27.32 hp [20.4 kW]|
|Drawbar (tested):||21.95 hp [16.4 kW]|
|PTO (tested):||23.24 hp [17.3 kW]|
Which is better Ford 8N or 9N?
They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.
What is the difference between a Ford 9N and 2N?
Another main difference between the 9N and 2N was the fact the 9N featured a generator and battery, while the 2N used a magneto and a hand-crank starter.
How many hours are too many for a tractor?
Modern compact tractors however, tend to be pretty finished by the time they get to 3000 hours or so. But that will take 30 years at 100 hours a year. But modern farm tractors from 1990s onwards – are still going today and many are now pushing 10 – 15,000 hours.
How do you tell what year a 9N Ford tractor is?
The 9 was for the year, 1939, and N was Ford’s designation for tractor. The original price was $585. The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter.
How fast is a Ford 8N?
A 1952 Ford 8N tractor dubbed the “8NCREDIBLE,” has taken the title of world’s fastest farm tractor, reaching a speed of 96.3185 miles per hour.
What is a 1952 Ford 8N worth?
Around here you can get a pretty good 8n for $2500 or so, a little less for a tinkerer, more for restored. Big thing is the rear tires, new set runs around $700 so figure that in to purchase price.
Can a Ford 8N pull a 2 bottom plow?
They will not pull a 2 bottom plow and if you are mowing very thick grass with a 5ft. brush hog you are going to have to drive very, very slow.
Is a Ford 8N a good tractor?
The Ford 8N is the standard of reliability, built to last for generations. While these tractors do require occasional maintenance, there are no significant design flaws that would make this tractor unreliable. These tractors are easy to work on.
What years did Ford make 8N tractors?
The Ford 8N tractor was introduced in 1947, and 442,035 were built between then and 1952. The majority of them are still running. The 8N was the last of a series of tractors—the N-series—built by Ford starting in 1939, the first two being the 9N, made through 1942, and its successor the 2N, built through 1947.
What is a 2N Ford tractor worth?
(Ford’s L-head four-cylinder engine produced just 23hp at the belt pulley.) The 9N and 2N used three-speed transmissions, while the 8N was equipped with a four-speed, but this doesn’t seem to hamper the value of the older tractors. Prices typically range from $1,000 to $3,000, depending on condition.
What color is a 9N Ford tractor?
All 9N tractors were painted dark grey. This tractor has a rear PTO, which could be used to drive three-point or towed implements.
What year did Ford stop making tractors?
Henry Ford and Harry Ferguson.In 1928, Fordson tractor production was halted in the United States, only to be resurrected in 1939 as the Ford Model 9N.
How do I know what Ford tractor I have?
Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter. The first number is the model number.