By keeping it simple, the baler comes in the affordable range of $21,000 to $22,000. For comparison, the next model in the 9 series lineup – the 459 – starts around $25,000 and goes up to $35,000, depending on the options selected.
How much does a new round baler cost?
For harvesting 4-foot-by-5-foot round bales, estimated new equipment costs are $25,000 for a rotary mower/conditioner, $5,500 for a 10-foot rake, $35,000 for the baler and $55,000 for an adequate-sized tractor.
How many bales is a lot for a round baler?
Most round balers can easily get 6 or 7000 bales before breaking even one belt, and most round balers can put through at least 30,000 bales before needing complete belt replacement. Chain life depends on your lube.
How much horsepower do you need for a round baler?
Round bales are large and heavy, and it takes more of a tractor to put up round bales. You need to research very carefully how big of a tractor you need to drive a round baler. Usually it takes AT LEAST 55 PTO horsepower to run a round baler.
Which round baler is the best?
What is the best round baler for your farm?
- John Deere 459 Round Baler. …
- John Deere 469 Round Baler. …
- John Deere 559 Round Baler. …
- John Deere 569 Round Baler. …
- John Deere 569 Silage Special Baler. …
- John Deere 854 Silage Baler. …
- John Deere 569 Premium Round Baler.
- John Deere 469 Premium Round Baler. The next options for Deere round balers are the premium 469 and 569.
11 февр. 2017 г.
Who manufactures Kubota round balers?
Kubota Corporation acquires Kverneland Group and takes full ownership in May 2012. Kverneland Group acquires full control of Gallignani s.p.a., baler manufacturing company based in northern part of Italy.
How many bales will a roll of wrap do?
The estimates ranged from 28 to 32 bales per roll, based on four layers per bale (rather than six). Some stated that a roll of wrap would do 21 to 23 bales if extra coverage is needed for each bale, as is recommended in some quarters.
Can grass hay be too bale dry?
Some types of grass hay, in dry weather conditions or on dry ground, will be much too dry when baled as small bales using the eight to 15 percent moisture (the traditional rule of thumb) as a guide. Some of this grass hay produces the best quality bales when baled at 24 to 30 percent moisture.
What should I look for in a round baler?
Choosing the right round baler begins with an evaluation of your operation; looking at annual production, productivity expectations, equipment available, type of crop, storage options and end usage. Careful comparisons of features and specifications between balers can help you make the best choice for your operation.
What is the smallest round baler?
Abbriata makes square balers in 3 sizes. The smallest of the three, the Mini/S, has a total width of only 59 inches, making it the narrowest baler in the compact square baler class.
What size tractor do I need to move round bales?
If you want to move 5×5′ round bales, realistically you’re looking at a 5 series tractor. The size also makes them good for working in the woods, as they have great ground clearance and enough mass to remain more stable than some smaller tractors.
What HP tractor do I need to bale hay?
Most standard square balers on the market require 35 horsepower at your tractor’s PTO, and a minimum tractor weight of around 3000 pounds. That means that they cannot be run with today’s compact tractors. This can be a problem for small-farm operators who want square bales but don’t want to run a larger tractor.
Are Krone balers any good?
Subject: RE: Krone square balers any good? Yes, they are good. I don’t own one, but am leaning that direction after running both a Krone and a new Hesston (MF). Hesston has ruled the market here for a long time, but Krone has become pretty popular the last few years.
Where are John Deere round balers made?
Dain Manufacturing moved to a new 10-acre location in Ottumwa, Iowa. The location was placed next to a number of railways which made shipping easier. During this time, Dain was selling equipment to John Deere branch houses across the country.
What is the best small square hay baler?
In my opinion the Inlines (hesston, agco, mf, cat) are the best all around machine out there. They are much more consistent, less leaf loss, easier to work on, much more maneuverable, easier to transport and just make a good looking bale.