Question: What does SVC stand for on a John Deere lawn mower?

John Deere Connected Support™

How do you reset the service light on a John Deere lawn mower?

Turn the ignition key to the “Run” position, but do not start the engine. Leave the key in this position for two hours, then turn the ignition key to the “Stop” position and remove the key. The service timer will reset and come on when the next service interval is reached.

How do you reset the hour meter on a John Deere lawn mower?

To reset, hold the reset button (2) for 5-8 seconds until the meter reads all zero’s (“00000”). You may push the button to switch between modes until you’re back to the Hour Meter display. Click to see full answer. Then, how do you reset the hour meter on a John Deere lawn mower?

How do I reset my digital hour meter?

to reset a digital hr meter u simply short out the contacts at the the rear while the hour meter is least thats the case with honda hr meter.

IT IS INTERESTING:  Question: What is the function of Baler?

Can you reset a hour meter on mower?

The hourmeter, like a car odomometer, can not be reset or turned back. The only options are to make notes of what the correct hour(s) should be or to replace the hourmeter, this is not a warranty failure. If you are experiencing a problem with your product, find a solution by using our support assistant.

How do you reset the service interval on a John Deere 6155m?


  1. Press the menu button.
  2. Select Performance Monitor.
  3. Select Performance Monitor Settings softkey.
  4. At Performance Monitor page go to Service Alarm Interval box, and select it.
  5. Adjust service interval [If using thumb wheel, rotate thumb wheel forward or rearward to change hour setting displayed.] .

11 янв. 2015 г.

When should I change the oil on my John Deere riding mower?

John Deere’s recommended oil service for 100 Series Riding Lawn Tractors, is to change the System every 50 hours or once a season, whichever comes first.

How does an hour meter work?

Mechanical hour meters use a 50 or 60 Hz synchronous motor which drives a gear train to an odometer type register which counts hours and decimals of hours. … Some hour meters are driven via a bowden cable and measure engine hours at a particular engine speed e.g. 1500 RPM. for generators and farm tractors.

How do you read a hour meter on a tractor?

Reading the hour meter is similar on all tractors.

  1. Climb into the seat in the cab area of the tractor.
  2. Look for the small rectangular 8-digit odometer built into the dashboard of the tractor. Newer tractors have them digitally displayed on the dashboard so you will have to turn on the tractor to view the hours number.
IT IS INTERESTING:  Best answer: How much does a Yanmar tractor cost?

Can you reset a Hobbs meter?

They are actually fairly easy to reset, the basic idea is to slide the wheels apart, re-index, and reassemble.

How do I reset my Trail Tech hour meter?

Hold Button: Setup mode or reset. current main screen. SETUP MODE Hold Button 3 sec: Wait 3 sec: Wait 3 sec: Press to Increment. Press to decrement.

How do you reset the maintenance light on a bobcat?

key on, press the info button until the maint clock is displayed, then hold the button down until the display changes to “reset”, then key off.

How many hours will a Husqvarna riding mower last?

A typical mower that’s well maintained will last 1500 hours plus. A riding mower that’s meticulously maintained will last 20 plus years.

How do you reset the oil light on a Craftsman lawn mower?

Turn the key to the “Run” position, keeping the tractor’s engine off. Hold down the “D” and the “C” buttons at the same time for 5 seconds. When you release the buttons, any maintenance reminders on the dash should be reset.