|Category||Tractor Power||Lift arm pin diameter|
|1||20-45 HP||7⁄8 in (22 mm)|
|2||40-100 HP||1 1⁄8 in (29 mm)|
|3||80-225 HP||1 7⁄16 in (37 mm)|
|4||More than 180 HP||2 in (51 mm)|
What is a Category 1 or 2 tractor?
Category 0 Hitch For tractors with up to 20 horsepower. Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower.
What is a category one tractor?
It’s typically reserved for the smallest garden tractors that typically can have add-on three-point hitches put on to them, not stuff that typically comes as standard equipment. Category 1 is very, very common and typically you’re gonna see Category 1 on tractors under about 50 horsepower.
What is a Category 3 tractor?
Category 3 hitches are found on tractors of 80 hp to 225 hp and have top link pins that measure 1-1/4″ and lift arm pins of 1=7/16″. The spacing of the lift arms is about 38″. … Category 3 tractors are beyond what most homesteaders will have, but if you do be aware of the the difference between the cat.
What is the difference between category 0 and 1 hitch?
differences, as one goes up in Category implements the fabrication us usually more robust and can handle more tractor horsepower. In your case a Category 0 implement would probably be lighter weight than a Category 1 even though both are 48″. More weighty material & heftier fabrication = $200.
What is the difference between the Cat 1 2 3 point hitch?
The 3-point hitch comes in 5 different sizes, numbered from 0 to 4. The differences between them are the dimensions of the triangle and the size of the three connecting pins. The lower lift arms on a 3ph cat 1 are 26″ wide, with the top link being 18 inches above the center line, between the two lower lift arms.
What is a 3 point drawbar used for?
They come in real handy for skidding logs as you can lift the front of the log log up over obstacles. Also for trailer jockeying, having the hitch on the 3pt makes coupling trailers easy. with a ball on your scraper box you would be limited in it’s movement and you wouldn’t go over the road with it.
What is a PTO on a tractor?
The Power Take-Off (PTO) shaft is an efficient means of transferring mechanical power between farm tractors and implements.
What is a tractor drawbar used for?
Tractor drawbars are designed at the correct height from the ground to keep the pull forces below the center of gravity. Only use the drawbar to tow a load. A swinging or floating drawbar permits adjustment of the center line of pull to be maintained even on a hillside.
What is draft control on a tractor?
Draft control senses the extra strain on the hitch and allows the plow to raise just enough to get through the hard spot, immediately returning to the desired depth. The location of the draft control lever or knob is different in every tractor, but the process of determining the correct setting is the same.
What type of clothing should be worn when driving a tractor?
Loose-fitting clothing is easily caught in the moving parts of tractors and other equipment. Wear fitted pants, tuck in any loose shirt tails, and avoid wearing scarves when working on or around machinery. Protect your feet by wearing sturdy work shoes or boots with non-skid soles and steel toe caps.
How much weight can a 3 point hitch lift?
The lift capacity of the 3-point hitch is 1356 pounds (615 kg) measured at 24 in. behind the hitch balls.
What size is CAT 1 3 point hitch?
Three-point hitch specifications
|Category||Hitch pin size|
|1||19 mm (3⁄4″)||22.4 mm (7⁄8″)|
|2||25.5 mm (1″)||28.7 mm (1 1⁄8″)|
|3||31.75 mm (1 1⁄4″)||37.4 mm (1 7⁄16″)|
|4||45mm (1 3⁄4″)||51 mm (2″)|
How wide is a 3 point hitch?
|Category 2||Category 3|
|Lower link hole diameter||28.70 mm (1.13 in.)||37.34 mm (1.47 in.)|
|Lower hitch point Span (1)||825 mm (32.48 in.)||964.95 mm (37.99 in.)|
|Width of ball (2)||44.96 mm (1.77 in.)||44.96 mm (1.77 in.)|
|Pin centerline – Lower to upper (3)||610.11 mm (24.02 in.)||685.04 mm (26.97 in.)|
What is a sleeve hitch for a garden tractor?
Once attached, the sleeve hitch lets you place ground engaging attachments to your garden tractor at the proper angle for convenient use. Boasting a simple one-time installation of mounting brackets to the tractor, the sleeve hitch offers super-simple removal for tractor use with other tow-behind attachments.