Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower. Long days can seem even longer when you aren’t comfortable.
What is a Category 2 tractor?
Once you cross over 50 horsepower and you move up into utility tractors, you’re gonna move into Category 2. This is typically used on tractors between about 50 and 150 horsepower or so, although there are always gonna be some exceptions in those ranges.
What is the difference between Category 1 and Category 2 hitch?
The lower lift pins are 7/8″ in diameter, and the top link pin is 3/4″. The cat 1 hitch is used on tractors from 20-45 hp. A cat 2 hitch is 32″ wide. The top link is located 24″ above the center line between the two lower lift pins.
What are tractor categories?
What are the 3-point hitch categories?
|Category||Tractor Power||Lift arm pin diameter|
|1||20-45 HP||7⁄8 in (22 mm)|
|2||40-100 HP||1 1⁄8 in (29 mm)|
|3||80-225 HP||1 7⁄16 in (37 mm)|
|4||More than 180 HP||2 in (51 mm)|
What is a Category 2 three point hitch?
The maximum horsepower for cat. 2 hitches is around 125 hp. These 3-points use 1″ top link pins and 1-1/8″ lift arm pins. The lift arm spacing is 32″. Category 2 equipment is built much more heavy duty than cat.
What is the difference between category 0 and 1 hitch?
differences, as one goes up in Category implements the fabrication us usually more robust and can handle more tractor horsepower. In your case a Category 0 implement would probably be lighter weight than a Category 1 even though both are 48″. More weighty material & heftier fabrication = $200.
What is a 3 point drawbar used for?
They come in real handy for skidding logs as you can lift the front of the log log up over obstacles. Also for trailer jockeying, having the hitch on the 3pt makes coupling trailers easy. with a ball on your scraper box you would be limited in it’s movement and you wouldn’t go over the road with it.
What size are CAT 2 pins?
|Country of Origin||Imported|
|Hitch Category||1 to 2|
|Pin Diameter||7/8 in.|
|Pin Length||5 in.|
Does a 3 point hitch float?
Registered User. A 3 point hitch is always in a “float” mode it does not have any down pressure. Depending on your tractor it may have position control, were the downward travel is controlled by the 3 point lever, the futher it is moved the lower the lift arms will drop.
What size is CAT 1 3 point hitch?
Three-point hitch specifications
|Category||Hitch pin size|
|1||19 mm (3⁄4″)||22.4 mm (7⁄8″)|
|2||25.5 mm (1″)||28.7 mm (1 1⁄8″)|
|3||31.75 mm (1 1⁄4″)||37.4 mm (1 7⁄16″)|
|4||45mm (1 3⁄4″)||51 mm (2″)|
What type of clothing should be worn when driving a tractor?
Loose-fitting clothing is easily caught in the moving parts of tractors and other equipment. Wear fitted pants, tuck in any loose shirt tails, and avoid wearing scarves when working on or around machinery. Protect your feet by wearing sturdy work shoes or boots with non-skid soles and steel toe caps.
What is a drawbar on tractor?
noun. a heavy bar, often made of steel, attached to the rear of a tractor and used as a hitch for pulling machinery, as a plow or mower.
How much weight can a 3 point hitch lift?
The lift capacity of the 3-point hitch is 1356 pounds (615 kg) measured at 24 in. behind the hitch balls.
What is a 2 point hitch?
The planter 2-point hitch provides a reliable, simple, and secure method for tractor attachment. This hitch design utilizes the tractor’s Category 3 or 4N quick-hitch for fast, one-person hookup. … The offset crossbar allows an operator to move the planter over 7.5-in. by changing an attaching pin location.
What size are cat 1 pins?
|Pin Diameter||1-1/7 in.|
|Pin Length||6-1/2 in.|
|Pins Type||Draw Pin|