What kind of oil does a John Deere 425 take?

In addition to engine oil, the 425 holds 6 quarts, or 5.7 liters, of hydraulic oil with the oil filter installed. John Deere recommends using Turf-Gard, Torq-Gard Supreme, Torq-Guard Supreme plus 5D or JD Plus-4 engine oil in 425 lawn tractors.

What engine is in a John Deere 425?

John Deere 425

John Deere 425 Engine
20HP Kawasaki 617cc 2-cyl gasoline
Fuel tank 6.5 gal 24.6 L
Engine details …

What type of oil does a John Deere tractor use?

Recommended Oil Viscosity Grades

John Deere prefers that 10W-30 be used in all its gasoline-powered engines, including those on riding mowers. The “W” indicates that the oil was tested at low air temperatures. A 10W-30 weight engine oil is viscous even at temperatures as low as negative 4 degrees Fahrenheit.

How much oil does a John Deere 3320 hold?

John Deere 3320 Engine

Engine Detail
Yanmar 3TNV88
Oil capacity: 5.1 qts 4.8 L
ROPS Coolant capacity: 5.6 qts 5.3 L
Cab Coolant capacity: 7.4 qts 7.0 L
IT IS INTERESTING:  What is the best lawn tractor for hilly terrain?

Can I use synthetic oil in my John Deere riding lawn mower?

Then, can I use synthetic oil in my John Deere mower? Yes! We have modified our engine oil recommendations to state that you may now use a synthetic 5W30 (100074WEB) or 10W30 oil in all temperature ranges. We recommend the use of Briggs & Stratton Synthetic Oil.

How do you push a John Deere 425?

How to Push a John Deere Z425 Hydrostatic Mower

  1. Turn off the engine and and remove the key form the ignition switch.
  2. Set the parking brake and raise the operator’s seat. Locate the release valves on the inside of each of the drive pumps. …
  3. Push the lawn mower to the desired destination. Because of hydraulic drag, the machine push slowly. …
  4. Set the parking brake.

How much oil does a John Deere 425 take?

The 425 lawn tractor uses two types of oil: engine oil and hydraulic oil. The engine oil capacity with the oil filter installed is 1.5 quarts, or 1.4 liters.

What weight is John Deere Hygard?

Product information

Product Dimensions 12 x 12 x 14.8 inches
Item Weight 40.2 pounds
Manufacturer John Deere
Customer Reviews 4.9 out of 5 stars 51 ratings 4.9 out of 5 stars

How often should I change oil in my John Deere riding mower?

John Deere’s recommended oil service for 100 Series Riding Lawn Tractors, is to change the System every 50 hours or once a season, whichever comes first.

What is the best oil for a tractor?

Rotella 5W-40W, Mobil 1 5W-40W and John Deere 0W-40W. Diesel trucks get Mobil 1. Older vintage tractors get Rotella. Newer tractors (after 2007 fuel change) get the JD synthetic.

IT IS INTERESTING:  What is the best push mower to buy?

What does a John Deere 3320 weigh?

John Deere 3320

Dimensions & Tires
Wheelbase: 68 inches 172 cm
Weight: 2900 to 3570 pounds
Front tire: 7-14
Rear tire: 11.2-24

Is it OK to put synthetic oil in a lawn mower?

When choosing lawn mower oil, use a high-quality detergent oil classified as “For Service SF, SG, SH, SJ” or higher. Do not use special additives. Synthetic oils are an acceptable oil at all temperatures. The use of synthetic oil does not alter required oil change intervals.

Is John Deere plus 50 II synthetic?

SAE 0W-40 Plus-50 II is a full synthetic PAO (Poly Alpha Olefin) based oil to provide excellent performance.

How much oil does a John Deere riding mower take?

Oil catch pan or other container to drain old oil into (bucket, large coffee can, etc.); typical John Deere mowers hold two quarts of oil.