How do I tell what year my Ford tractor is?
To determine this, look at the tractor production code, also known as the unit date code. The first digit of the tractor production code gives the production year. For tractors manufactured between 1965 and 1974, the digit corresponds with the last number in the year.
How do you tell what year a tractor is?
The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below. The 8th digit of the number is 1.
How do you tell what year my Ford 3000 tractor is?
The Ford 3000 model was made from 1965 thru 1974. The numbers we need to identify your tractor are stamped into the metal on a flat spot just above and behind your starter. Serial number, model number, and date of manufacture. They may be covered with dirt, paint, or rust.
How many horsepower is a 3600 Ford tractor?
|Ford 3600 Power|
|Engine (gross):||48 hp 35.8 kW|
|Engine (net):||45 hp 33.6 kW|
|Drawbar (claimed):||34 hp 25.4 kW|
|PTO (claimed):||40 hp 29.8 kW|
How do I know what Ford tractor I have?
Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter. The first number is the model number.
How do you read a Ford tractor serial number?
Serial numbers were stamped on the upper/left/front corner of the engine block until 22238. After that serial numbers were stamped on the left/front/side of the transmission housing.
|Built from 1952 – 1954 Serial Numbers – (Note Change To NAA Prefix)|
|1954||NAA77475 to NAA128965|
How many horsepower is a 3000 Ford tractor?
Ford 3000 features a water-cooled motor and 3-cylinder OHV. The engine of this tractor is capable of producing 37 horsepower. You can get this tractor with built-in 158 cubic inches gas and 175 cubic inches diesel engine.
How do you read a John Deere 13 digit serial number?
Identify the next four letters and numbers after the factory code, which will be positions three to six in a 13-symbol VIN, or positions four to seven in a 17-symbol VIN. This is the model number. For instance, in the John Deere VIN CD6068G123456, 6068 is the model number.
What is the difference between a Ford 8n and 9n tractor?
They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.
Are Ford 3000 tractors any good?
A 3000 is one of the best small tractors ever built by any brand or color of that era. They are absolutely bulletproof. Good parts availability – both new and used, not hard to work on. They are nimble – especially with power steering, have an excellent power to weight ratio and shucky- darn, are just fun to drive.
How do you read a tractor serial number?
Your serial number should lie between two of the stated numbers. Example: In this example, tractor serial number was 900 was built in 1981 because it is after the first serial number for 1981 but before the first number for 1982. The list only shows the number from the first tractor built in each year.
Does Ford 3000 have live PTO?
It has a 3-cylinder OHV, water-cooled engine. It could be ordered with a Ford-built 158-cubic-inch gas or 175-cubic-inch diesel engine. It was rated at 130 horsepower at the PTO. … Some of the available options were differential lock, power steering, Live PTO and hydraulic remote valves.
How much does a 3600 Ford tractor weigh?
Here is what we know about the Ford 3600 Tractor. It has a 3 cylinder Ford diesel or gasoline engine and this model weighs up to 6900 pounds.
How many horsepower is a 4000 Ford?
|Ford 4000 Power|
|Engine:||55 hp 41.0 kW|
|Drawbar (claimed):||41 hp 30.6 kW|
|PTO (claimed):||46 hp 34.3 kW|
How much horsepower does a 3910 Ford tractor have?
Here is what we know about the Ford 3910 Tractor. It has a 3 cylinder Ford diesel engine that produces 47 horsepower. This Ford tractor is available with optional two wheel drive and four wheel drive models that weigh 4500 pounds.