One part of the standard indicates you do not have to shut your forklift truck off as long as you are within visual distance of it, specifically 25 feet. … The definition of unattended is: beyond the vision of the operator or more than 25 feet from the operator, whichever is less.
Can you leave a forklift running?
Requirements and Recommended Practices: A powered industrial truck is considered “unattended”: When the operator is 25 ft. or more away from the vehicle even if it remains in his view, or whenever the operator leaves the vehicle and it is not in his view.
Where can you not park a forklift?
Do not park the forklift in a location with its fork arms protruding the passageway, where there are a lot of pedestrians who will have to step over them. Do not leave the truck in any access doorways and it should not block any stairways of the workplace. Never leave the truck near first aid stations.
What is the proper position of the forks when the forklift is left unattended?
Lower the forks to the floor when parking the forklift. Make sure that the forks touch the ground when you are leaving. Apply the parking brake when it is the idle position. All operational controls of the truck must be in the neutral position before the driver alight the forklift compartment.
How do you turn off a forklift?
SHUT DOWN PROCEDURES – YOU MUST:
- Return your forklift to the proper area.
- Put the directional lever in neutral.
- Set the parking brake.
- Completely lower the forks.
- Put the mast in full vertical position.
- Turn off the forklift.
- Take the key and return it to its proper place.
17 июн. 2017 г.
Why are forklifts so dangerous?
There are many factors that explain why forklifts are dangerous: Forklifts are heavy. … The weight of a forklift is unevenly distributed, which makes it harder to operate and drive. The rear wheels of a forklift are responsible for turning the vehicle, increasing the chances of tipping during tight turns.
How long does it take to stop a forklift at full speed?
And when they are carrying heavy payloads, forklifts can take even further to stop. If a forklift is traveling 7 miles per hour, it can take the operator approximately 16 feet to stop the vehicle completely in an emergency. Increase that speed to 9 mph and it can take more than 21 feet to stop.
Which step should you do every time you park a forklift?
Set the parking brake every time you park the forklift. Make sure you test the parking brake at the beginning of your shift when you do the forklift inspection. While in the driver’s seat, set the parking brake and then put the gear into forward or reverse and step on the accelerator slightly.
What to do if forklift tips over?
If the forklift is tipping over, protect yourself by staying put: Stay in your seat and do not attempt to jump off. Lean away from the falling direction of the lift. Hold onto the steering wheel and make sure you’re stable.
How soon should repairs be made to a forklift?
The more you use your forklift, the more often you should have it serviced by a factory trained technician. A forklift that gets heavy use might require a forklift maintenance visit every 90 days.
How high should your forks be when driving forklift?
Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy. Carry the load low and tilted back.
When traveling with a load the load should be lifted 5 inches?
once you are clear, stop the forklift and lower the forks as far as possible. On a flat floor, lower them until they are 2 to 5 inches above the floor. On rough terrain, lift the forks higher to accommodate uneven ground.
Can you smoke on a forklift?
Smoking inside the forklift cabin or anywhere else in the warehouse should not be allowed and be strictly prohibited at all times. Forklift operators who may be caught smoking while at work or inside the workplace can be severely reprimanded. He could be terminated from work if the company policy says so.
Is a forklift deemed unsafe if the horn doesn’t work?
A forklift is classified as a vehicle which is designed to carry and lift heavy loads. … When the horn of the forklift does not operate, it is considered not safe to use. The horn of the forklift is very important because it is used as a signal to warn anyone around the area.
How often should you inspect a forklift?
Federal OSHA requires that forklift vehicles have to be inspected at least daily, or after each shift when used around the clock. You will find this requirement in the Powered Industrial Truck standard at 1910.178(q)(7). OSHA does not require that forklift inspections be documented.
Is driving a forklift hard?
It is not hard to drive a forklift. But to be a skilled forklift driver takes a lot of practice. … It is not hard to drive a forklift. But to be a skilled forklift driver takes a lot of practice.