Course Requirements The Health and safety legislation (height regulations 2005) in the UK require that states that any job that requires a scissor lift or a boom lift must be operated by some one who is competent using a MEWP or Mobile Elevated Work Platform such as a scissor lift.
Can anyone use a scissor lift?
Yes, you do. Scissor lifts can be dangerous and can cause accidents leading to personal injuries as well as structural and equipment damage. Current regulations state that all personnel who work with or near scissor lifts must be trained and licenced.
Do you need to be certified to use a scissor lift?
Per OSHA requirements and guidelines, employers are responsible for providing training. Bottom line: you do need a license to operate a scissor lift! … Even though scissor lifts are considered scaffolding by OSHA (and not aerial lifts), they’re still subject to comprehensive safety rules and regulations.
What do you need to operate a scissor lift?
For scissor lifts, this usually means an EWP Operator Ticket (Yellow Card). This covers the operation of platforms under 11 metres in height. If you’re operating platforms taller than 11 metres, you’ll need a WorkCover High Risk Work Licence issued for the state you’re in.
Who can use a scissor lift?
Only allow trained workers to use a scissor lift
Any workers who use a forklift (operate, move & work on) should have the correct training before they’re allowed to operate the equipment. IPAF and MEWPs training is vital in order to gain a PAL (Powered Access Licence) and covers all aspects of scissor lift use.
How dangerous are scissor lifts?
One of the most common risks that accompany owning a scissor lift is the risk of overturning. When aerial work platforms are used correctly, they are not dangerous. Often times they are set up on uneven ground that is not suitable for equipment that carries the risk of tipping.
How often is scissor lift training required?
1) How often is aerial lift training required? Per OSHA aerial lift training requirements, all new employees require aerial lift and scissor lift training. Every three years, your employees need to be recertified.
Do you need a yellow card to operate a scissor lift?
No. There is no requirement to hold a WP High Risk Work Licence to operate a scissor lift. However it is necessary to be trained and familiar with in the equipment you are using. Training can be obtained by undertaking an EWPA Yellow Card course.
Can you lift material with a scissor lift?
High capacity MEWPs are often a great solution for lifting materials. The highest capacity scissor lift that Genie manufactures is the Genie GS-3390 RT model with a 2,500-lb capacity and 39-ft of working height. It is designed for lifting heavy or large materials and is a good option for large jobsites.