How do you charge a scissor lift?

Where do you plug in a scissor lift?

Locate the battery charger on the base of the lift on the right side. Older models will often have the charger mounted in the rear of the lift.

How long does it take to charge a scissor lift?

Charging time is approximately 12 hours for the first few charges, 4 hours after the first two full battery cycles, at which point the battery will reach maximum capacity.

Can you use a scissor lift while charging?

It is important to note that it is possible to use your scissor lift whilst the battery is being charged. All you need to do is pull the red emergency shut-off button out and have a helper guide the extension cord away from the wheels whilst the equipment is moving.

How are scissor lifts powered?

Scissor lifts require linear motion to supply elevation and this force is provided by a pneumatic or hydraulic actuator, or a mechanical input such as a leadscrew or rack and pinion drive. Scissor lifts under fluid power are preferred because a purge valve allows the lift to be lowered during a malfunction.

IT IS INTERESTING:  How do cranes get built?

Can a scissor lift move while elevated?

Some safe work practices to ensure safe, stable conditions for scissor lift use include: Follow the manufacturer’s instructions for safe movement—this usually rules out moving the lift in an elevated position. … Use the scissor lift outside only when weather conditions are good.

What do the numbers on a scissor lift mean?

Scissor Lifts Brand Names

With the most popular brands like Genie, Skyjack, JLG, the number in the names of the scissor lifts relates to the width and the height of the machine. Generally, the first two numbers are the platform height, whereas the last two numbers are the width of the machine.

How do you use a Skyjack scissor lift?

How To Operate A Scissor Lift

  1. Pull out the emergency stop button on the control panel.
  2. Select “platform” with off/platform/base select key switch.
  3. Enter the platform.
  4. Pull out the emergency stop button on the platform control panel.
  5. Proceed with job using the required buttons, levers and controller located on the operator console.

How do you charge a JLG 1930es?

DO NOT OPEN OR DISASSEMBLE CHARGER.

Operation

  1. Connect the charger to a grounded outlet. 3-4.
  2. On the battery charger, the charger will automatically. turn on and go through a short LED indicator self-test. All LED’s will flash in sequence for two seconds.
  3. The batteries are fully charged when green light on.

How do you turn on a Skyjack scissor lift?

How To Operate A Scissor Lift

  1. Pull out the emergency stop button on the control panel.
  2. Select “platform” with off/platform/base select key switch.
  3. Enter the platform.
  4. Pull out the emergency stop button on the platform control panel.
  5. Proceed with job using the required buttons, levers and controller located on the operator console.
IT IS INTERESTING:  Can I use a forklift on a public road?

How much weight can a scissor lift lift?

A 19-foot scissor lift with a maximum working height of 25 feet and a lift capacity of 500 pounds will weigh approximately one ton. A 26-foot lift with a maximum platform weight capacity of 800 pounds and a maximum platform height of 25.5 feet can weigh as much as 4,700 pounds.

How much does a scissor lift Cost?

Scissor lifts usually cost between $10,000 and $15,000. Larger models sell for as much as $50,000. A standard 30- to 40-foot boom lift costs between $25,000 to $75,000.

How much can a scissor lift lift?

Many scissor lifts have an unrestricted weight capacity of approximately 1,000 pounds, and higher restricted weight capacities. The largest, most powerful scissor lifts can hold up to 50 tons of material. These are usually rough terrain hydraulic scissor lifts used in heavy construction.

Efficiency