To remove a Hills folding rotary clothes line from its ground socket, you need to turn the locking colar and dis-engaged this from the ground socket to start with and then the clothesline should lift out.
How do you remove a Hills Hoist locking collar?
4.5 To remove from the ground socket: Unlock the locking collar by rotating anti-clockwise. Lift the Rotary Hoist from the ground socket and store in a suitable place. Insert the cover into the top of the ground socket. If only a single line requires re-tensioning, just re-tension this particular line.
How do you take down a rotary clothesline?
Spread the rotary clothesline arms out slightly, then hold the lower part of the slider and slide it up the mast until it is near the collar and hook. Hold the hook open until the slider hits the collar then release.
How do you replace a Hills hoist line?
1.1 Open up the Hoist and lock into position.
- 1.2 Remove the old polycore line from your clothesline. …
- 1.4 Thread the line through the four end caps as shown in Fig. …
- 1.5 Pull the line tight and ensure that the arms are square to each other before tying off as per Fig.
How do I remove an old clothesline post?
Dig around the cement base with a shovel. If your pole doesn’t have a cement base, dig around the pole until you’re able to lean against the pole, working it loose. You can then remove the pole.
Are rotary washing lines any good?
A washing line can be cost-effective and efficient in a large garden. … Rotary dryers are great for small gardens. Like an umbrella, they can be put up only when needed – the rest of the time taking up only a tiny amount of space or even put away and stored in a shed or porch.
Why won’t my rotary line go up?
The weather has brightened so out comes your trusty Rotary Washing Line – but it won’t open! … Rotary Airers can get tangled when they are stored away or collapsed hastily in bad weather. Most commonly, it’s because the clothes lines have got looped over one or more of the arms.
How much is a Hills Hoist clothesline?
Fully galvanised and traditional style – prices range from around $470 – $600. Budget fixed Hills Hoist models with plastic crank case – prices range from $350 – $440. Premium modern folding rotary models – prices range from $280 – $360.
How do you get old concrete posts out of the ground?
Thinking a bit more about it, the easiest way to get mine out whole might have been to dig a hole/slot beside the post, tilt it into the hole then pivot/pull it up out of the ground over a log/fulcrum/roller at the end of the slot using the weight of the long post to counterbalance the concrete slug on the end.
How do you break a concrete fence post base?
Break the concrete footing into two or more sections, using a cold chisel and steel mallet. Drive the tip of the chisel into the seam between the base of the post and top of the concrete until the concrete breaks. Repeat this on the opposite side of the post.