Scissor lifts provide a safe and reliable platform for workers to perform job tasks when used according to the manufacturer’s instructions. When not used properly, scissor lifts can present a serious hazard to workers. Employers are responsible for keeping workers safe.
Do you have to wear fall protection in a scissor lift?
In regards to your specific question, when working from an elevated scissors lift (ANSI A92. 6 series), a worker need only be protected from falling by a properly designed and maintained guardrail system.
How stable is a scissor lift?
The study found that the scissor lift was stable at all heights up to at least 300 pounds of applied side force. … During the curb tests, the scissor lift was driven at maximum forward and reverse speeds on a flat, level surface.
Can you climb out of a scissor lift?
Answer: OSHA standards do not prohibit employees from exiting or entering an aerial lift basket that rests on or adjacent to an elevated surface. … Section 1926.453(b)(2)(iii), which prohibits “belting off to an adjacent pole, structure, or equipment while working from an aerial lift,” does not apply to scissor lifts.
How many hours does a scissor lift last?
A scissor lift will only count the hours as it is in motion, so if you are hanging drywall or doing electrical, it’s not counting those hours. So, we would say that a scissor lift can last about 500 to 1,000 hours of movement.
Do you wear a harness in a scissor lift?
The use of harnesses in scissor lifts is strictly site & risk assessment specific. …
How do I get a scissor lift certification?
All you have to do is sign up your workers, have them complete the hour-long course, and you and your workplace will be compliant with all OSHA regulations. For both aerial lift and scissor lift training, the program costs only $75 and comes with free three-year renewals for life!
Do you need a yellow card to operate a scissor lift?
No. There is no requirement to hold a WP High Risk Work Licence to operate a scissor lift. However it is necessary to be trained and familiar with in the equipment you are using. Training can be obtained by undertaking an EWPA Yellow Card course.
Can you tie off to a boom lift?
While some manufacturers allow the boom lift to be used as a fall-arrest anchor while working from the structure, it is never allowable to belt-off to adjacent structures or poles while in the platform.
Is fall protection required on a boom lift?
According to OSHA standard, employees must wear “a personal fall arrest or travel restraint system” when working from a boom lift. Why do boom lifts require the use of fall protection? This is because there is a significant risk of employees being ejected from these types of lifts.
Does OSHA require aerial lift training?
The simple answer is no. Currently, there are no requirements set forth by OSHA or the manufacturers of aerial lifts for operators to be certified. … According to OSHA Subpart L, 1926.453(a)(2), “only authorized persons shall operate an aerial lift.”
How much does a new scissor lift Cost?
Scissor lifts usually cost between $10,000 and $15,000. Larger models sell for as much as $50,000. A standard 30- to 40-foot boom lift costs between $25,000 to $75,000.
Can you use a scissor lift while charging?
It is important to note that it is possible to use your scissor lift whilst the battery is being charged. All you need to do is pull the red emergency shut-off button out and have a helper guide the extension cord away from the wheels whilst the equipment is moving.
Can a scissor lift get wet?
Wet conditions mean slippery conditions for both the wheels on your scissor lift hire and for the staff working on them. As most access equipment is made primarily from metals such as steel, when these surface materials get wet, there is very little traction for those on board.