OSHA states the pedestrian has the right of way; therefore, operators must be on constant alert. The forklift operator is required to slow down and sound their horn at doorways, intersections, blind spots and when entering or exiting a building.
What is the distance that I keep away from a forklift?
Pedestrian exclusion zones should be enforced within a three metre radius of a forklift. This distance should expand when the height of the forklift load or the speed travelled increases.
When on foot How much distance should someone be from the operator of a forklift?
The safe traveling distance between forklifts is approximately three truck lengths, or about a time-lapse of three seconds when passing the same point. More specifically, it’s about 20 feet between forklifts. The three-second rule is the same for automobiles on the road and is just as important for forklifts.
Is it OK to allow a coworker to hitch a ride on your forklift?
Do not allow anyone to stand or pass under the load or lifting mechanism. When possible, make eye contact with pedestrians or other forklift operators.
What is the fulcrum point on a forklift?
On a sit-down counterbalanced forklift, the fulcrum or pivot point is the axle of the front wheels. It is this product, or Load Moment, which determines how much overturning force is being applied to the forklift.
What is the most common forklift accident?
A forklift overturning is the most common incident, accounting for 24% of all forklift accidents. If companies implemented more stringent training policies, the Occupational Safety & Health Administration (OSHA) estimates that about 70% of forklift accidents in the US could be prevented.
What is the largest cause of fatal or serious forklift accidents?
Forklift overturns are the leading cause of fatalities involving lift trucks. Overturns can be caused by: Improper turning. Driving with an elevated load.
What is the first thing you need to do before raising or lowering a load?
Ensure the load is secured before moving. Slowly move the truck to 20 to 30 cm (8 to 12 inches) away from the stack. Stop the truck. Return the mast to the vertical position before lowering the load.
What direction should the lift be driven down a ramp when carrying a load?
When going down a ramp, drive in reverse with the load and keep the forks pointed up the slope. When traveling without a load, the forks should always point down the slope. The forklift operator should also drive in reverse up the ramp or drive forward when going down the ramp.
When picking up a load the correct fork spacing should be?
Answer: When picking up a load the correct fork spacing should be 6 inches and also the forks must be spaced as wide apart as necessary for the maximum support of the load.
Which steps should you do every time you park a forklift?
- Select an area to park. Do not park in an unauthorized area. Do not block an aisle or exits. Follow your company’s parking procedures.
- Apply brake slowly and stop.
- Neutralize the controls.
- Set the parking brake.
- Turn off the ignition.
- If the truck is parked on an incline, block the wheels.
Can you lift a person with a forklift?
If the manufacturer’s operator manual states that a forklift is not to be used for elevating personnel platforms, use of the equipment to support such a platform would violate this provision. Consequently, OSHA prohibits the use of such equipment to elevate personnel.
What is the first thing to do before driving into a trailer with a forklift?
Before driving your forklift into a trailer, you should chock the trailer wheels, support the nose of the trailer, inspect the dock plate, and check the trailer floor (all of these).
Can a forklift tip over without a load?
Forklift Safety Rule Two: Don’t tip over. Many untrained operators assume that they can drive faster without a load, but look at the location of the CG with unloaded forks. … On the other hand a loaded forklift is more likely to tip forward with the CG now closer to the front axle.
How much weight can a forklift pick up?
Forklift capacities range from about 3,000 lbs up to more than 70,000+ lbs. You can find the rated capacity of a forklift on its data plate. OSHA requires “only loads within the rated capacity of a truck shall be handled.” It’s easy to think the rated capacity is the same as maximum capacity, but it’s not that simple.
How much can a 5000 lb forklift lift?
A 5,000-lb. capacity forklift will lift that much weight up to 48-inch forks (with a 24-inch load center) but going out to 60 inches (with a 30-inch load center), for example, drops the capacity to 4,000 pounds.