The three major parts of a lift truck are the body (truck), overhead guard, and hydraulic lift.
What are the parts of a forklift called?
For more information on forklift masts, read our article Forklift Mast Types.
- LIFT CYLINDER. The forklift lift cylinder powers the vertical movement of the mast, or the raising or lowering of the forklift carriage and the forks. …
- TILT CYLINDER. …
- FORKLIFT CARRIAGE. …
- FORKS. …
- LOAD BACKREST. …
- COUNTERWEIGHT. …
- POWER SUPPLY. …
What is a 3 stage forklift?
3-Stage – A three stage mast, or triplex, is the most versatile forklift mast and also the most popular. The outer rails allow for free lift, and the two inner sections can lift loads higher than a two stage. This mast type is a good choice for general warehouse applications.
What are the 3 pedals on a forklift for?
To begin with, every forklift comes equipped with an accelerator and a brake pedal. That third pedal is called an Inching Brake. Its function is twofold. It initially acts as a brake and secondly disengages the transmission, allowing the engine speed to increase or decrease without affecting the drive of the forklift.
What are the three points of a forklift that make up the stability triangle?
Most forklifts have a three-point suspension system. The three points are the two front wheels and the pivot point of the rear axle. Connect the three points, and you have what’s called the stability triangle. One major difference between a forklift and a car is stability.
What is another name for a forklift?
Forklift Synonyms – WordHippo Thesaurus.
What is another word for forklift?
|fork hoist||forklift truck|
What are forklift tines?
Forklift forks, also known as tines or blades, are used to lift and carry loads. They are an integral part of the forklift and ensuring you are using the correct ones and that they are in good condition is essential to both the safety of personnel, but also the forklift and the load.
How high is a 2 stage forklift?
A typical two stage mast for a forklift with a capacity from 2,000 lbs. to 6,000 lbs. will have approximately 130″ of maximum lift and will be around 83-88″ Overall Height Lowered (OAHL). Two stage masts are very common in high capacity forklifts of 15,000 lbs. and up.
How high can a forklift go?
Most standard forklifts can reach heights between 10 and 15 ft, but special forklifts like the telehandler can lift as high as 55 ft depending on the telehandler size you select.
What is a low profile forklift?
Affordable and lightweight with a lifting capacity of 4000 pounds, this specialized low clearance unit adds value where other forklifts can’t. The Low Profile Series has standard features that include side shift, strobe light, smart backup alarm, and corrosion resistant features.
Is driving a forklift difficult?
Driving forklift is not complicated as it seems. Just like an ordinary sedan car, a forklift can be fairly easy to operate. It only takes short time and little practice for you to get a grasp of it. But make no mistake, just because it is easy to operate, does it mean you will put your guard down.
What is a inching control on a forklift?
The purpose of the inching pedal is to disengage the transmission without having to shift the gear lever into neutral every time a lift is performed. This pedal allows you to bring the forklift to a stop or to slow it down. … This pedal allows you to adjust the rotational speed of the engine.
What is a safe speed for a forklift?
The Material Handling Equipment Distributors Association (MHEDA) recommends a max speed of 8 mph in general and a 3 mph max speed in areas where pedestrians are present.
Where is the center of gravity on a forklift?
Center of gravity means the point on an object at which all of the object’s weight is concentrated and all of the parts balance each other. For symmetrical loads, the center of gravity is at the middle of the load in terms of the load’s length, width and height. (Figure 10).
What is the maximum weight a forklift can carry?
Forklift capacities range from about 3,000 lbs up to more than 70,000+ lbs. You can find the rated capacity of a forklift on its data plate. OSHA requires “only loads within the rated capacity of a truck shall be handled.” It’s easy to think the rated capacity is the same as maximum capacity, but it’s not that simple.
What is the number one cause of forklift accidents?
#1 Hitting or running over a pedestrian
According to the National Institute for Occupational Safety and Health (NIOSH), nearly 20 percent of forklift accidents involve a pedestrian, and 36% of deaths forklift-related deaths are pedestrians.