When turning, always slow down to a safe level and turn the steering wheel in a smooth, sweeping motion. When driving up or down a grade (or incline), always do so slowly. When driving up or down a grade in excess of 10 percent, drive a loaded truck with the load upgrade. Don’t run over loose objects on the path of …
What should you do when a forklift begins to turnover?
If the forklift is tipping over, protect yourself by staying put:
- Stay in your seat and do not attempt to jump off.
- Lean away from the falling direction of the lift.
- Hold onto the steering wheel and make sure you’re stable.
How do you turn on a forklift?
Turn the key to start the forklift.
Locate the emergency brake lever on the left side of the machine and make sure it’s pulled down and activated. Put the key into the ignition on the right side of the steering column and turn it forward to start the forklift’s engine.
Which of the following actions should be taken when driving a forklift?
[29 CFR 1910.178(n)(8)] The driver must slow down for wet and slippery floors. [29 CFR 1910.178(n)(10)] The driver must look in the direction of, and keep a clear view of, the path of travel.
- Select an area to park. …
- Apply brake slowly and stop.
- Neutralize the controls.
- Set the parking brake.
- Turn off the ignition.
When putting a load on a forklift which of the following should you not do?
Never travel with the load tilted forward. Tilting the load forward increases the load distance and makes the load less stable (Figure 7).
What is the most common cause of a forklift accident?
17 Sep The Most Common Forklift Accidents:
Now, the most common types of a forklift accident are when one overturns, when a worker is stuck, pinned-beneath, or crushed by a forklift, or when a worker falls from a forklift. An overturning forklift is a terrifying scenario.
Where can you not park a forklift?
Do not park the forklift in a location with its fork arms protruding the passageway, where there are a lot of pedestrians who will have to step over them. Do not leave the truck in any access doorways and it should not block any stairways of the workplace. Never leave the truck near first aid stations.
Why do forklifts have 3 pedals?
To begin with, every forklift comes equipped with an accelerator and a brake pedal. That third pedal is called an Inching Brake. Its function is twofold. It initially acts as a brake and secondly disengages the transmission, allowing the engine speed to increase or decrease without affecting the drive of the forklift.
What is the most important safety device on a forklift?
5 most important safety devices on a forklift
- Brakes. Brakes are the absolute most important safety feature on any motorized vehicle. …
- Seatbelts. All powered industrial lift trucks manufactured after 1992 are required to have a restraint system or enclosure of some kind, according to OSHA Director John B. …
- Overhead guards. …
- Lights. …
10 окт. 2018 г.
Is a forklift deemed unsafe if the horn doesn’t work?
A forklift is classified as a vehicle which is designed to carry and lift heavy loads. … When the horn of the forklift does not operate, it is considered not safe to use. The horn of the forklift is very important because it is used as a signal to warn anyone around the area.
What are the four main causes of forklift injuries?
4 Common Causes of Forklift Operator Injury or Death
- Lift trucks are inadvertently driven off loading docks.
- Lifts fall between docks and an unsecured trailer while a worker in onboard.
- Workers (or pedestrians) can be struck by a lift truck.
- Trucks may fall while on elevated pallets and tines.
4 мар. 2019 г.
When traveling with empty forklift the forks should be in what position?
Figure 7. Traveling down ramp without load. Requirements and Recommended Practices: When traveling without a load, the forks should point downgrade, regardless of direction of travel.
What is on a forklift test?
For your forklift test, you will need to know to check your mirrors and use the horn. You have to be aware of your surroundings and your speed. You will also monitor foot traffic and load position. Everything requires your full attention.
What will make the load more stable during travel?
When traveling with a load, always make sure to tilt the mast of the forklift backward so that the load will firmly place against the backrest to make it more secure during transport. By doing this, you move the center of gravity towards to rear of the forklift making it more secure when traveling.
What happens when the load Centre is increased?
The weight capacity of a forklift attachment is tied to what is known as the Maximum Load Moment, which is when the load center distance increases, changing the weight distribution, and as a result, the amount of weight a truck can carry under those conditions.
What is the load Centre distance on a forklift?
A load center is the horizontal distance from the vertical face of the forks to the center of gravity of the load. As a general rule, load center is 24″ from the face of the forks (the center point of standard 48” x 48” pallet). Forklift capacities range from about 3,000 lbs up to more than 70,000+ lbs.