Neal reports that the machine moved an average of 1,900 tons of material per hour with a 6-cubic-yard bucket. Considering that their 20-ton excavators can move nearly 490 tons per hour, the advantage of the larger machine is clear.

## How many feet can an excavator dig in a day?

“That’s one trench with one operator, opening up 10,000 feet of trench per day, whereas one excavator can open up 1,000 to 1,500 feet per day.

## How much excavation can be done in a day by Labour?

If it is known that the average amount of material to be excavated is 2m³ in volume per metre length of ditch, and the productivity norm of the workers is set at 3m³ per day, then the project could be completed in one day with 667 workers. At the other extreme, it would take about three years with one worker.

## How much does an excavator cost per hour?

Average Excavator Hourly Rate

Average hourly rates tend to vary greatly due to location but tend to run between $120 to $150 an hour. That rate includes both the equipment and the operator and often comes with a minimum number of hours – typically at least one day or eight hours.

## How much dirt can a bobcat move in a day?

Assuming lose dirt and not moving it very far, you could do 30 to 40 yards pretty easy. If it is just moving lose dirt you might be better off with a small front loader, easier to operate.

## How deep does a mini excavator dig?

A 4,000- to 6,000-pound mini excavator can dig a 10-foot-deep hole. Larger 10,000- to 12,000-pound mini excavators allow dig depths as deep as 14 feet.

## How many feet per minute will a trencher dig?

The trencher offers a cutting depth of 12 inches and can trench up to 30 feet per minute.

## How do you calculate excavation?

Add the length at the top of the excavation to the length at the bottom of the excavation and divide by 2 to get the average length. Do the same for the width. Multiply the average length times the average width times the average depth and divide by 27.

## How do you calculate cost of excavation?

of days required for 10m3 excavation = 10/242.4242 = 0.04125 days. Likewise, based on the capacity of other equipment, labors etc., their cost is calculated. Contractors profit is also added to the total cost of labors and machineries. Then grand total gives the rate of excavation per 10m3 of soil excavation.

## How do you calculate topsoil excavation?

To calculate how much topsoil you need, simply measure the dimensions of the area you wish to cover and multiply this by the depth required. Measuring in metres is simplest, as this will give you the volume of topsoil you need in cubic metres. For example: A site has an area of 10m x 15m and needs a coverage of 150mm.

## How many hours does a excavator last?

Don’t rush into into a second hand excavator

We aim to sell equipment before it reaches the 2,000 hour mark, and given that excavator equipment can be expected to last between 7,000 and 10,000 hours before needing repair, buying a second hand excavator from us will give you many, many hours of work.

## How much fuel does an excavator use per hour?

It all depends on the excavator. A cat 330 will use between 10 and 14 gallons per hour. And an Hitachi 350 or Komatsu 300 will use between 5 and 8 gallons per hour.

## How much does a mini excavator cost per hour?

The rates for 11,000-12,000lb mini excavators is 70-75 dollars per hour CND a smaller mini like the 331 I can see around 60-65 dollars.

## How long does it take to move 10 yards of dirt?

Any which way, 6-8 hours is workable if you can sustain that kind of pace … Plus the beer will taste better with someone to share it with. by wheelbarrow? 1 person and 10 cubic yards, the dirt pile is about 50 feet away from it fill in area, I’m thinking about 6- 8 hours……

## How much dirt can a dingo move?

During our test, we used the Dingo to move 10 cubic yards of soil in about 4 hours. To be more specific, we moved it uphill and over a front lawn, through a gate, around the back of a house and into the backyard.